I have to humbly make a correction to my recent post regarding the front sway bar. It's been a looong winter and I finally got a chance to look under my car again. The sway bar is mounted with the bar offset toward the REAR of the car. I should have added that the bolts should be re-Loctited with 242 Loctite and torqued to 35nm or 26 ft lbs. Sorry. Bruce Benson >. In other words you can remove the front sway bar >mounts and re-install > them without affecting alignment. Just be sure to install >the rubber bushing > the same way as they were with the sway bar offset >towards the front of the > car. I would suggest heating the bolts with a propane >torch prior to > removing them as they were installed using green >locktight and the heat will > soften that. Otherwise you could have a problem with >the threads in the > captive nuts in the frame.