[DML] Tune-up

["stainlessilusion" <5n-@xxxxxxx>]

Guys; I am working on my D a little since I have a rough running engine, and am curious what the original coil has for output voltage. I'm looking at John's 25,000 volt Bosch coil [as an upgrade?] since I doubt the stock one has that much punch to it. I have +4 plugs that are a little old but few miles and are still in good shape; also Johns 8mm wires and upgraded resistor. I once used the blaster coil with my setup but I remember having problems with it - I believe it was melted distributor rotor but can't remember correctly. Nonetheless, with what I have as far as plugs, wires and resister; which coil should I be going after? My engine runs like garbage when it rains, and when it is dry it sputters at stops from time to time and just doesn't feel "right". Thanks guys -----Dani B. in FL!



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/