Home Made Plug Wires

["content22207" <brobertson@xxxx>]

Doubt if any of the racing folks make umbrella boot wires, but here's
a thought:

Stress or fatigue broke one of my Bosch's at the plug end (probably
leaned against it working on something else). Made a replacement by
transferring umbrella boot to old straight boot wire. Unfortunately
cracked wire seal too, so I used part of former straight boot to make
an umbrella for the umbrella. Works, but am horse trading for an old
Bosch to have complete set.

Couldn't all 6 umbrellas be transferred to whatever wire set tickles
someone's fancy?

Looked up your MSD's in Jegs and they are indeed $60-75 a set. Guess
racing wires have come down in price.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, BondAtomic@xxxx wrote:
> I don't know exactly which length and such would fit with the DMC,
but MSD 
> makes one hell of a wire. I have their Super Conductor wires on my
Silverado, 
> and they make a big difference, even with the coil-per-cylinder
ignition system. 
> MSD rates their wires at 40-50 ohms per foot, which seems to be
quite a bit 
> less than other manufacturers. Out of Summit Racing, mine were $60.
> 
> John
> 4275
> 
> 
> [Non-text portions of this message have been removed]