Re: [DML] Removing the ignition switch,from the steering shaft
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Removing the ignition switch,from the steering shaft
- From: "Paul Salsbury" <paul.salsbury@xxxx>
- Date: Thu, 28 Nov 2002 20:11:43 +0000 (GMT Standard Time)
Those two "huge rivit" are in fact shear bolts. They are designed to snap
off at the point of correct torque so as not to crush the column. You will
have to drill them out and then get new shear bolts to fasten it all back
together.
Paul
#6463
-------Original Message-------
Subject: [DML] Removing the ignition switch,from the steering shaft
Ok,here is one that has me stumped.
How do I remove the ignition switch(the key lock ignition switch
p/n106679) from the steering column shaft?
Back to the Home of PROJECT VIXEN