Re: re no rough idle

[Joe Palatinus <jpalatinus@xxxx>]

>The 
>mixture screw is a very sensitive adjustment so if a 1/2 turn isn't 
>making a difference you probably have a vacuum leak somewhere (which 
>might account for your bad gas mileage)

How might one check for vacuum leaks? My problem is my idle does not hunt
AT ALL even at start up. If I had a leak wouldn't that make my idle hunt?
After driving the car 300 miles after I adjusted the co screw 1/2 turn
lean, I did stall twice while I was at stop lights, but my idle was not
affected at all. Could it be something like my cold start valve is on
constantly? I don't know I'm just tossing out ideas and seeing what comes
back.
Thanks
Joe Palatinus
VIN 17167 6808


>Idle quality (hunting) is directly affected by vacuum leaks, a 
>breakdown of the secondary ignition system dirty or missfiring 
>injecters, and an out of balance cylinder ie: low compression, burnt 
>valve etc