RE: [DML] Re:Door Lock solenoids/Car Alarm
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Re:Door Lock solenoids/Car Alarm



I have remote locks also, and they work fine. But I still have a LockZilla.
They're wired so that the alarm system throws the driver's door, and the
lock module functions throws the other lock.

The alarm module has a relay for putting 12V on a lock motor but it's
nowhere near needed rating for the solenoids' current draw. A second relay
was put into place. If I recall, there are two red (12V) wires to each
solenoid, and the alarm took control of one of the red wired for the
drivers' door though a high-amp external relay.

Hope that helps,


Gus Schlachter
Austin, TX
VIN# 4695


> -----Original Message-----
> From: Stian Birkeland [mailto:dmc_norway@xxxx]
> Sent: Saturday, April 08, 2000 3:07 PM
> To: dmcnews@xxxxxxxxxxx
> Subject: Re: [DML] Re:Door Lock solenoids/Car Alarm
>
>
> Hello,
> Has anyone had any experience with wiring of a car alarm that
> also works the
> door lock central locking system. Is it possible to use such a
> feature on an
> alarm system together with the door locks and door lock module or
> is it not
> advisable?
>
> Best wishes
> Stian Birkeland
> NORWAY
>
> >From: "Dave Swingle" <dswingle@xxxx>
> >Reply-To: dmcnews@xxxxxxxxxxx
> >To: dmcnews@xxxxxxxxxxx
> >Subject: [DML] Re:Door Lock solenoids
> >Date: Sat, 08 Apr 2000 01:14:24 -0000
> >
> >
> >This takes about 70 feet of #20 enameled motor (magnet) wire per
> >coil. Each solenoid has two coils.
> >
> >Details on other lock repair issues at:
> >http://www.dmcnews.com/Techsection/doorlocks.htm
> >
> >Dave
> >
> >--- In dmcnews@xxxxxxxxxxx, burkephoto@xxxx wrote:
> > > In a message dated 4/7/00 10:02:33 AM Eastern Daylight Time,
> >dmcjoe@xxxx
> > > writes:
> > >
> > > << you will probably
> > > have to install new solenoids as well. >>
> > >
> > > I just wanted to mention that burned out solenoids can be very
> >easily
> > > rewound. I've done it by unwinding the old wire (measure and
> >record the
> > > length) and getting the same gauge and length and carfully
> >rewinding the
> > > solenoid.
> >
> >
> >
> >Before posting messages or replies, see the posting policy rules at:
> >www.dmcnews.com/Admin/rules.html
> >
> >To address comments privately to the moderating team, please address:
> >moderator@xxxx
> >
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated