Re: [DML] Re:Door Lock solenoids/Car Alarm
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re:Door Lock solenoids/Car Alarm



Hello,
Has anyone had any experience with wiring of a car alarm that also works the door lock central locking system. Is it possible to use such a feature on an alarm system together with the door locks and door lock module or is it not advisable?


Best wishes
Stian Birkeland
NORWAY

From: "Dave Swingle" <dswingle@xxxx>
Reply-To: dmcnews@xxxxxxxxxxx
To: dmcnews@xxxxxxxxxxx
Subject: [DML] Re:Door Lock solenoids
Date: Sat, 08 Apr 2000 01:14:24 -0000


This takes about 70 feet of #20 enameled motor (magnet) wire per coil. Each solenoid has two coils.

Details on other lock repair issues at:
http://www.dmcnews.com/Techsection/doorlocks.htm

Dave

--- In dmcnews@xxxxxxxxxxx, burkephoto@xxxx wrote:
> In a message dated 4/7/00 10:02:33 AM Eastern Daylight Time,
dmcjoe@xxxx
> writes:
>
> << you will probably
> have to install new solenoids as well. >>
>
> I just wanted to mention that burned out solenoids can be very
easily
> rewound. I've done it by unwinding the old wire (measure and
record the
> length) and getting the same gauge and length and carfully
rewinding the
> solenoid.



Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxx


______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated