A rough estimate would be between £4000-5000 (getting on for $10000) for a complete setup, ready to drop in and go, after swapping over a bunch of bits from your old engine! The actual -engine- is around $3000. It's when you start including custom ECUs chargecoolers, custom exhaust etc etc etc that things get pricey! DMCH's setup works with what you have and the only "new" parts are the exhaust and reground cams. I'm hardly expecting anyone to bite right now. The exchange rate is putting paid to that, but the one thing that I want to stress is how a turbo PRV looks on paper compared to how it goes on the road. They knock out in incredible amount of torque. The standard GTA V6 Turbo's 2.5 engine puts out "only" 200hp but I feel very safe saying that one of them would wipe the floor with one of DMCH's stage II's (and ours!). I'm aiming for 250hp from the 3 litre turbo but should be able to achieve 300ft-lbs, so an uprated clutch will be highly recommended..... :-D Basically: You can take your DeLorean to its limits with a PRV. Martin Bob Brandys wrote: > Martin, > > You may want to consider putting together a website that shows all the > necessary components and how to install them. > > If people knew how much this cost and how much work it was, they may be > more interested in tackling this project or paying someone to do it. > > Would it cost about the same or more than the new DMCH engine? > > Bob > > [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/DMCForum/join (Yahoo! ID required) <*> To change settings via email: mailto:DMCForum-digest@xxxxxxxxxxxxxxx mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/