It need an angle drive, new or used, as long as it works. DMCH and their franchises seems to be sold out and will not have any more for months. I have had a lot of trouble with them, and after testing my cables, lambda counter, etc, I have determined it was the angle drive that failed each time. All of the replacement angle drives I have installed have binded gears. If you spin the cable forward, it seems to move OK, but when you go in reverse it locks up. I have replaced the drive 4 times so far. I really need some help!!! I called Rob Grady to inquire about his "Hardcore" version that he used to produce, he said he might consider making more of them if there was enough interest. If you also need one of these then let him know! Keep in mind that his unit will cost more than twice what the DMCH version sells for, but if it works, isn't it worth it? If you have one for sale please contact me! Thanks, - Bob VIN#5278 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/