Hi Bob, Aside from the four that you already got, there are: - 2 bolts holding the rear pontoons to the rear wraparound part of the frame - 6 (IIRC) on the inside that secure the fiberglass to the middle section of the frame. On those inside ones, four are towards the rear and two are towards the front of the center console area. They're located at the base of the fiberglass, so IMO, it's easiest to remove the seats and then pull the carpet down to access them. As for the steering column, I think the easiest place is at the joint where the column connects to the rack - just loosen the bolt that clamps it to the rack and you're set. Hope this helps. Travis > I know there are 2 visible bolts in the bonnet that have to be > removed. > I know there are 2 visible bolts in the rear engine area that have to > be removed. > > But where are the other bolts in the center of the car? > > How do I access them? > > What section of the steering column needs to be loosened? > > Bob To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/