RE: [DML] WANTED: Angle Drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] WANTED: Angle Drive



This may not be related to your problem .... I observed that my angle drive
cable is just a bit long.  When I pushed the cap on, it would push it back
out just a tiny bit.  If ran that way it could cause wear problems with the
angle drive.  I cut a hole in the yellow cap so that the angle drive cable
does not see a load in it.
 
Nick
 

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Robert Moseley
Sent: Monday, November 19, 2007 4:39 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] WANTED: Angle Drive



It need an angle drive, new or used, as long as it works.
DMCH and their franchises seems to be sold out and will not have
any more for months.
I have had a lot of trouble with them, and after testing my cables,
lambda counter, etc, I have determined it was the angle drive that
failed each time.
All of the replacement angle drives I have installed have binded gears.
If you spin the cable forward, it seems to move OK, but when you
go in reverse it locks up.
I have replaced the drive 4 times so far.
I really need some help!!!

I called Rob Grady to inquire about his "Hardcore" version that
he used to produce, he said he might consider making more of them
if there was enough interest. If you also need one of these then
let him know! Keep in mind that his unit will cost more than twice
what the DMCH version sells for, but if it works, isn't it worth it?

If you have one for sale please contact me!
Thanks,
- Bob
VIN#5278



 


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.0/1139 - Release Date: 11/19/2007
12:35 PM



No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.503 / Virus Database: 269.16.1/1141 - Release Date: 11/20/2007
11:34 AM
 


[Non-text portions of this message have been removed]



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated