[DML] Problems Installing Door Lock Actuators...Any Help?

["p12c16" <PRC1216@xxxxxxx>]

Hey there all,
     I hope you had a good holiday.  I just got a set of DPNW's door
lock actuators and attempted to install them yesterday in my 30 degree
garage.  Everything is hooked up exactly as the instructions stated,
yet they still don't seem to perform much better than my solenoids
that I thought were burned out.  I cleaned the wiper switches inside
the door, and the linkages seem okay, but when I lock one door
sometimes it may lock another, or it may just move the switch halfway
either to lock or unlock on the other side of the car.  And the remote
lock/unlock feature that I installed a while ago for the door
launchers will give the same results, either half locking one or both
or doing nothing at all.  Has anyone else installed these and had
similar problems?  Any other ideas on where to look to correct this
problem?

Thanks,
Patrick
1880








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/