RE: [DML] Replacing heat sheild.

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Steve, Be careful, You may rupture or break the motor mounts.
John Hervey



-----Original Message-----
From: Stephen Jaeger [mailto:sjaeger@xxxxxxxxxxx]
Sent: Monday, March 15, 2004 7:31 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Replacing heat sheild.


I have to replace the heat shield that goes around the catalytic converter.
I need a little room between
the cat and the frame to do this. I was hoping someone could save me some
time by confirming
that I can raise the engine a few inches after loosening the engine mounting
bolts only and not having
to disconnect anything else. Also, is it safe to jack up the engine under
the oil pan.

Thanks
Steve


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/