[DML] Replacing heat sheild.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Replacing heat sheild.



I have to replace the heat shield that goes around the catalytic converter. I need a little room between 
the cat and the frame to do this. I was hoping someone could save me some time by confirming 
that I can raise the engine a few inches after loosening the engine mounting bolts only and not having 
to disconnect anything else. Also, is it safe to jack up the engine under the oil pan.

Thanks
Steve


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated