BLOCK-IT 380 Series fabric is Kimberly-Clark's newest film barrier fabric, offering great performance at a competitive price. At 3.2 ounces per square yard it's about half the weight of the popular high-performance NOAH® fabric.

The three-layer construction uses inner and outer layers of spunbond, sandwiching a middle layer protective film barrier. The film barrier has microscopic holes, smaller than droplets of water (and most dust particles) to stop moisture, but still allow any moisture vapor or heat to easily escape from under the cover.

• Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric.

• Breathable - Air easily circulates through the fabric to help it dry quickly and reduce heat build-up under cover.

• Dust / Pollution Barrier - The middle barrier layer acts as a filtration barrier against most airborne pollutants.

• Easy To Use - Won't shrink or stretch and retains it's tailored shape. Three (3) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable during normal use. Covercraft will repair or replace, to the original purchaser, after required inspection.

• Double stitched overlapped seams

• Neoprene elastic hems – the elastic in the front and rear hems helps hold the cover in place

• Reinforced, non-scratch grommets – use a tie-down rope (supplied) or a vinyl coated cable and lock (optional)

Durable, woven polycotton blend offers good basic vehicle protection. Polyester is sun and water resistant, while cotton gives a soft touch to the vehicle's finish.

• Drill Weave Fabric - Resists tears and punctures.
• Water Resistant - Treated for moisture repellency.
• Breathable - Allows evaporation of moisture and reduces heat build-up under the cover.
• Rot, Mildew Resistant - Treated to resist rot and mildew.

Technalon covers, using Block-It Evolution 4-layer polypropylene construction fabric, provide superior protection in all weather conditions. Often imitated, but never equaled, U.S. made Evolution fabric covers are used by millions of satisfied car enthusiasts around the world.

• Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric.
• Dries Easily - Moisture is not absorbed by the fabric fibers.
• Breathable - Allows air to circulate through the fabric.
• Dust / Pollution Barrier - The two middle layers of 400 Series fabric act as a filtration barrier against most airborne pollutants as small as 0.1 microns (smaller than talc).
• Impact Absorption - 4-layer thickness absorbs impacts better than any other vehicle cover fabric to help protect the finish from nicks, dings, dents and scratches.

Made in the U.S., by Kimberly-Clark, this flannel-like fabric is a 4-layer non-woven composite, ultrasonically laminated to provide a high degree of dust protection during inside storage, while remaining breathable and soft against any fine stainless finish. Maximum dust protection, yet it's lighter and easier to handle, compared to traditional woven fabrics.

• Soft But Strong Outer Layers - The two top layers are constructed of a polypropylene / polyethylene composite spunbond. These layers take advantage of the Best features of both polymers: the superior softness of polyethylene, with the strength and stability of polypropylene.
• Dust Barrier - A melt-blown polypropylene layer serves as a barrier to most dust, dirt and pollution. Dustop's multi-layer construction provides substantially better dust protection when compared to traditional woven, single layer fabrics.
• Softest, Stainless Protecting Inner Layer - The high-loft polypropylene / polyethylene inner layer pampers and protects the vehicle's finish. (This is the same material used for Kimberly-Clark's infant-care products, and if it's soft enough for a baby's skin you know it's soft against the vehicle finish.)

Favored by traditional enthusiasts, tan flannel always provides a soft touch to pamper fine stainless finishes. Designed primarily for indoor storage use, this woven cover is constructed from a durable polycotton blend.

• Flannel Underside - Soft, napped finish.
• Long Wearing - Over 50% heavier than our gray polycotton fabric.
• Breathable - Allows moisture to evaporate and will not trap heat under cover.
• Water Resistant - Treated for moisture repellency.
• Rot, Mildew Resistant - Treated to resist rot and mildew.

NOAH barrier fabric is highly water resistant, yet it "breathes" to allow any trapped moisture, seam seepage or condensation to easily evaporate. The unique patented construction process results in a cover with maximum all-weather protection...highly water resistant, dust resistant, UV resistant and breathable to make sure moisture and/or heat don't stay under the cover. Made in the U.S. by Kimberly-Clark, the fabric weighs only 4.45 oz./sq. yd., so it's easy to handle and fold.

• Protective Outer Layers - A bi-component spun bond, using sheath-core technology. The inner core is polypropylene for strength, with a polyethylene wrap for softness. A silver-gray color was selected because of its heat-resistant properties. The fabric is also treated with UV inhibitors for extended outdoor use.
• Micro-Porous Middle Layer - The barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor to escape.
• Soft Inner Layer - A bi-component fabric made with polyethylene and nylon. This combination results in an exceptionally high strength-to-weight ratio, with the "soft touch" necessary to protect your stainless.  

You can't buy a better cover than Weathershield ®! The ULTIMATE COVER!

Originally developed for outdoor performance wear, the Nextec® encapsulation process uses precision and controlled placement of proprietary polymers to make ordinary fabrics extraordinary! This patented encapsulation process places an ultra-thin film around the fabric fibers and precisely places a durable, breathable barrier within the woven polyester fabric to complete the high performance process. Unlike traditional coatings and laminations that just protect one side of the fabric, Nextec uses up to 40 computerized process controls to place protective polymers inside the fabric, to shed water, and stop dust, bird droppings, tree sap and industrial pollutants from reaching your vehicle's finish. The result is a fabric that provides maximum protection, but isn't bulky and hard to store. Using Nextec encapsulation technology we've created the ultimate car cover...and we named it WeatherShield® because no other fabric has every shielded your DMC from the elements like this one!

Encapsulation coats the fibers and fills the voids between the threads with a breathable barrier to assure moisture, dust and pollutants are kept away from the vehicles finish. The base, high-strength, polyester fabric is naturally UV resistant, but we've added UV inhibitors to the polymers to help slow down the degradation that occurs naturally to anything exposed to sun for an extended period of time.

• Sheds Water - Encapsulation process assures fabric sheds water as soon as it hits the cover.
• Superior Dry Time - Because the fabric sheds moisture it has an absorption factor of only 2%, compared with up to 40% for standard woven and non-woven fabrics. That means, if the cover has been sitting out in the rain you only need to shake it and the residue moisture will easily dry, in the trunk or on the car.
• Breathable - Allows any heat or condensation under the cover to easily escape.
• UV Resistant - Special additives prevent UV degradation and protect your DMC's stainless and interior.
• Dust-proof - Patented fiber encapsulation process prevents dust from filtering through the fabric.
• Scratch-less - Polymers provide a silky smooth finish to the fabric and provide superior stainless protection. Nextec fabric has been tested at 1,000 cycles on abrasion wheels without scratching (surface must be clean).
• Durable - The encapsulation process is not affected by heat or cold and the process won't degrade over the life of the fabric.
• Easy Care - Unlike non-woven fabrics you can clean the WeatherShield® cover in your HOME washer and dryer.
• Packs Small & Light - All this protection in a lightweight package that packs into 1/4 to 1/2 the volume of multi-layer, non-woven fabrics. Minimal storage space, but maximum protection!

Black (WB), Bright Blue (WD), Red (WR), Yellow (WY), Green (WN), Light Blue (WL), Taupe (WT), Gray (WG) 4 year warranty