Re: [doc] Oh for an O'ring !
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] Oh for an O'ring !



The original o-rings WERE rounded - the fact that they came out flattened into the shape of the recesses in the heads showed beyond doubt that they needed changing.

The seal that goes into the bottom of the metering flap bit seals up where the idlespeed motor outlet pushes into it. It's a kind of brass affair with a rubber ring around the inside - commonly used in hydraulics and called a Dowty seal. Available in a Parker Store (hydraulics place) for a few pence. Alternatively, John Hervey sells a complete O-ring set for the whole engine. That'll save some hassle www.specialtauto.com

Darren should be able to help with the hoses.

Martin

Claire Usher wrote:

Hi Andy,

if I remember rightly these are the O rings that Martin and Dave needed when we were rebuilding 'Flopsy's engine....I hunted high and low for them but had to end up getting rounded O-rings instead of the original flat ones that came out of the engine.

I got them in one of our local motor factors in the end, I just took in an oily cloth with the old ones in (to get them sized). The only one I couldnt get was the 'doughty seal' - forgotten where that one goes - Martin, can you remember??

Hope this helps,

Claire #2292 'Flopsy'
www.ourdelorean.co.uk


----- Original Message ----- From: Andy Snell To: 'doc-uk@xxxxxxxxxxxxxxx' Sent: Wednesday, March 12, 2003 8:43 AM
Subject: [doc] Oh for an O'ring !



Hi there,


This is the first time I've used the Delorean mailing, so a big hello from
me in Bath!

I am wondering if anyone out there knows of where I can get hold of the 6
original rubber O rings that sit in the ports between the air assembly unit
and the cylinder head blocks. Also do you know where I can get hold of the
fuel distribution rubber or nylon pipe sets?

Many thanks,

Andy









Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated