Hi Andy, if I remember rightly these are the O rings that Martin and Dave needed when we were rebuilding 'Flopsy's engine....I hunted high and low for them but had to end up getting rounded O-rings instead of the original flat ones that came out of the engine. I got them in one of our local motor factors in the end, I just took in an oily cloth with the old ones in (to get them sized). The only one I couldnt get was the 'doughty seal' - forgotten where that one goes - Martin, can you remember?? Hope this helps, Claire #2292 'Flopsy' www.ourdelorean.co.uk ----- Original Message ----- From: Andy Snell To: 'doc-uk@xxxxxxxxxxxxxxx' Sent: Wednesday, March 12, 2003 8:43 AM Subject: [doc] Oh for an O'ring ! Hi there, This is the first time I've used the Delorean mailing, so a big hello from me in Bath! I am wondering if anyone out there knows of where I can get hold of the 6 original rubber O rings that sit in the ports between the air assembly unit and the cylinder head blocks. Also do you know where I can get hold of the fuel distribution rubber or nylon pipe sets? Many thanks, Andy [Non-text portions of this message have been removed]