RE: [doc] Oh for an O'ring !

[Andy Snell <andy@xxxx>]

Thanks Claire - I had managed to get some round ones that nearly fit but I
found that they popped out of position as I bolted the air assembly in
place. I guess the flat ones never did that!

I'll let you know if I do find a source of originals.

All the best

Andy



> ----------
> From: Claire Usher
> Reply To: doc-uk@xxxxxxxxxxxxxxx
> Sent: Wednesday, March 12, 2003 9:33 AM
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: Re: [doc] Oh for an O'ring !
> 
> Hi Andy,
> 
> if I remember rightly these are the O rings that Martin and Dave needed
> when we were rebuilding 'Flopsy's engine....I hunted high and low for them
> but had to end up getting rounded O-rings instead of the original flat
> ones that came out of the engine.
> 
> I got them in one of our local motor factors in the end, I just took in an
> oily cloth with the old ones in (to get them sized). The only one I
> couldnt get was the 'doughty seal' - forgotten where that one goes -
> Martin, can you remember??
> 
> Hope this helps,
> 
> Claire 
> #2292 'Flopsy'
> www.ourdelorean.co.uk
> 
> ----- Original Message ----- 
> From: Andy Snell 
> To: 'doc-uk@xxxxxxxxxxxxxxx' 
> Sent: Wednesday, March 12, 2003 8:43 AM
> Subject: [doc] Oh for an O'ring !
> 
> 
> Hi there,
> 
> This is the first time I've used the Delorean mailing, so a big hello from
> me in Bath!
> 
> I am wondering if anyone out there knows of where I can get hold of the 6
> original rubber O rings that sit in the ports between the air assembly
> unit
> and the cylinder head blocks. Also do you know where I can get hold of the
> fuel distribution rubber or nylon pipe sets?
> 
> Many thanks,
> 
> Andy
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are assumed
> public and may be printed in the club magazine ** 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
> 
>