[doc] Re: RELAY (UPDATE)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] Re: RELAY (UPDATE)



Electrical Contact Cleaner fantastic stuff!
Solved most of the electrical problems on my car.
Nick H

--- In doc-uk@xxxxxxxxxxxxxxx, "Alistair McCann" <aclassali@xxxx>
wrote:
> Hi Folks
>
> Well the problem with my relays seems to be ok now.  I went back to
the car
> last night after work and sprayed electrical cleaner in all the
sockets and
> then replaced the relays, I also checked all the wires underneath
to make
> sure that they were all tight.
>
> The car fired straight up which is rare for my car without a bit of
throttle
> first - so I may have fixed the starter/fuel relay completly.
>
> As for my relay compartment.  When I first got the car my relays
were all
> the original, I had the two fan fail relays still fitted which I
quickly
> updated to John Herveys kit.  The main difference with any other
relay
> compartment I have seen is that my fuel pump relay is to the right
of the
> compartment lamp delay relay and not to the left of it like
everyone elses -
> and that I have about 5 spare relay housings all over the place too
the back
> of the rear wall.
>
> Well thats about that, I will see you all at the NEC hopefully with
my car,
> which I am having prblems convincing my father to navigate for
me.......
>
> Alistair.
> DOC 404
> ----- Original Message -----
> From: "jchapelhow" <chapelhow@xxxx>
> To: <doc-uk@xxxxxxxxxxxxxxx>
> Sent: Saturday, September 25, 2004 8:08 PM
> Subject: [doc] Re: RELAY (UPDATE)
>
>
> Alistair
>
>
> Try http://www.deloreanparts.com/zilla_006.htm for a guide to
> adjusting the electrical relay connections.
>
> It depends what your relay plugin 'bar' is like. Several of the
wires
> on my car were loose. In fact until I adjusted mine (and
sorted/moved)
> the circuit breaker, the whole metal panel on which the lock module
> sits was 'live' measuring ~12v!!!
>
> Out of curiosity what was in your fan fail and cooling fan relay
> sockets when you got it. Mine had the factory recall jumper wire but
> with an original blue fan fail module in the glovebox.
>
> Many of the connectors needed cleaning, and I went through 5 sets of
> dashboard instrument fuses in a week (this settled then settled
> down). The biggest improvement was after DMUK added a new ground
> cable to the dash ground point (behind the radio on the RHS), see
> files\electrical.
>
> John
>
>
>
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are
assumed
> public and may be printed in the club magazine **
> Yahoo! Groups Links



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **



Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated