Re: [doc] RELAY (UPDATE)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] RELAY (UPDATE)
- From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
- Date: Sat, 25 Sep 2004 21:21:39 +0100
Alistair,
I have EXACTLY this problem with my own car at the moment. Next time she
refuses to start, see if the blower motor works on speed 3 and 4 - no
kidding, if it's the same as mine, it won't work. The reason is the
relays for speed 3 and 4 and the start inhibit relay (which BTW needs to
be modded - see starter relay modification for early cars on
ww.dmcnews.com) share a ground - if that ground goes dodgy, the whole
line of relays stop working
All the best
Martin
alistairmccann wrote:
> Hi Folks
>
> Well I fitted the update relay kit and straight away ran into
> problems. The car would not start! I had been driving it only 5
> mins before I changed the relays and it still flat refused to
> start. The only relays that have anything to do with the starting
> of the car are the START INHIBIT RELAY and the FUEL RELAY. I had
> changed both of these and straight away thought that onbe of them
> must be faulty.... I took each one out in turn and tried starting
> but of course with both out the car didnt even turn over.
>
> I replaced the new relays and wiggled the wires underneath and tried
> starting her again and WHAM up she roared.
>
> I have no idea if me wiggling the wires helped or if the car needed
> time to get used to the new relays (can this happen??)but everything
> seems to be fine now (FINGERS CROSSED)I am heading out to work now
> so will check her again before I go to bed.
>
> Alistair
> DOC 404
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN