Re: [doc] What is the most common air con failure point?

["Phill Wright" <psw@xxxxxxxx>]

Ditto - (same guy) - pressurised system with nitrogen I think it was, 
up to 200psi and went everywhere with a sniffer - then pumped out the 
test gas before refilling with isceon 49 and mineral oil (the mineral 
oil he uses is flourescent green, so I presume that doubles as the 
dye as well?? ).

PhillW
6772

--- In doc-uk@xxxxxxxxxxxxxxx, "Richard" <dickyh11@xxxx> wrote:
> The chap who came to do my air con pumped in some other gas, and 
used a
> sniffer probe to detect the leaks
> 
> Rich Hutchinson
> DOC 365 VIN 1274 
> 
> > -----Original Message-----
> > From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On 
Behalf
> Of
> > John Chapelhow
> > Sent: 17 August 2005 21:37
> > To: doc-uk@xxxxxxxxxxxxxxx
> > Subject: Re: [doc] What is the most common air con failure point?
> > 
> > Alas, no dye. The 'short test' worked fine, there were no audible
> leaks
> > (the lack of dye was obviously a major oversight) are there other 
ways
> > to check?
> > 
> > :-(
> > 
> > John
> > 
> > 
> 
> 
>       
>       
>             
> ___________________________________________________________ 
> Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide 
with voicemail http://uk.messenger.yahoo.com







DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---