[DML] Re: Injector opening pressure

[Travis Graham <tgraham@xxxxxxxxxxx>]

Well, this question is moot in my case because the state of my  
injectors ranges from poor to horrible!  After seeing them in action  
on the bench tester, I'm surprised my car ran at all!  Most started  
dripping around 25psi, the few that held to *almost* the correct  
opening pressure had nothing close to the proper spray pattern.

I couldn't come up with one good one, much less six!  It's injector  
time :(

Travis
#6344, #3281



> Is up to 0.6 Bar an acceptable variation of the opening pressure
> between injectors or should I ideally be looking for something much
> closer?

------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/