[DML] Re: Injector opening pressure

[Travis Graham <tgraham@xxxxxxxxxxx>]

Argh!  I should have caught that.  I guess the fuel vapors have gotten  
to me... or the cold weather.

Is up to 0.6 Bar an acceptable variation of the opening pressure  
between injectors or should I ideally be looking for something much  
closer?

Thanks for the tips!

Travis


> Get out your Workshop Manual and open to D:02:01. Right hand side of
> the page #6. Opening Pressure 3.5-4.1 Bar. The most important thing is
> that they should all (6) be close in value so the motor will run
> smoothly. The closer they are the better. If you have access to the
> correct tester then you can also try cleaning the injectors too. Only
> use Mineral Spirits, NOT GASOLINE! That will help get them to all be
> more "equal". If the injector seals are hard they will not seal well
> and create a huge vacuum leak. Consider replacing the seals if they
> are not soft and pliable.


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/