Re: [DML] Machined lower control arms and Eibach setup

["Peter Kirchgessner" <fromyahoo@xxxxxxxxxxxxxxxx>]

Yes, the openings through which the shocks are mounted seem to be
wider in the original arms. But since the shocks get deformed on the
side, it is somewhat related to their diameter.

Peter + VIN 2678

--- In dmcnews@xxxxxxxxxxxxxxx, "Harold McElraft" <hmcelraft@...> wrote:
>
> I suspect that the cause of the damage is the travel of the shock 
> more so than the diameter of the shock. That said, OEM control arms 
> accommodate a wide variety of shocks without issue because of a wide 
> opening.
> 
> Harold McElraft - 3354
> 
> 
<snip>
>



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/