Re: [DML] Machined lower control arms and Eibach setup

["Peter Kirchgessner" <fromyahoo@xxxxxxxxxxxxxxxx>]

John,

thank you for the information. I just had a look at the Nissan shocks
this morning. They are 39 mm wide at the bottom. And they show two
marks where they are hitting the control arm and have been deformed.
So the original shocks would not solve the problem. I will think about
the possibilities I see: Grinding away aluminum where the shocks hit
the arms or replacing the control arms with nowadays improved
replacement parts that are working with Eibach setup.

Kind regards

Peter

--- In dmcnews@xxxxxxxxxxxxxxx, "John Hervey" <john@...> wrote:
>
> The OD is 40mm at the bottom of the shock.
>  
> John



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/