[DML] Cold intake / rear fascia removal

["Ryan Wright" <ryanpwright@xxxxxxxxx>]

Need some help in removing the rear fascia.

Primarily, I cannot get to the bolts on the right (passenger) side
that hold the fascia to the right pontoon. I pulled the cold air
intake apart as much as I could, but the big intake pipe that's within
the pontoon is blocking my access and I can't see a way to get it out.
Turning it does not give me enough clearance; I'm going to have to
disconnect it from the pontoon some how and pull it out.

There appears to be a round "clip" of sorts on the top of the pontoon,
which turns along with the pipe, so I'm thinking this is holding it
in. How do I remove this?!

Also, how do I get the intake "grill" that's connected to the glass
off? Is it siliconed on there? Doesn't appear to be any way to remove
it and prying on it is just going to break something. Getting this out
would help, I think, especially in getting to the upper bolt head.

Any advice would be appreciated.

-Ryan


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/