RE: [DML] Sensors under manifold

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Nathan, The only one I normally replace is the vacuum switch because of
moving parts that are 25+ years old and the movement is inside is governed
by coolant. Correct on the sensors. I don't think I have ever seen a bad
one. But, I do take them out B4 U take the coolant pipe loose because they
are so hard to get loose, then clean the probe end use some Teflon tape and
replace them. 
John Hervey
www.specialtauto.com

 


-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Nathan Sobieralski
Sent: Monday, November 13, 2006 10:19 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Sensors under manifold

Hello all,

Since the intake is off my car and I have easy access to the valley of 
death I was wondering how likely it is that any of the sensors on the 
internal water pipe need replacing. I have confirmed that the vacuum 
switch works. I have heard that the two sensors have no moving parts 
and don't usually fail. Has anyone out there experienced these 
failing? I don't want to spend money on parts that aren't broke but I 
also don't what to take the manifold off again for a long while!

Nathan
2277






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/