RE: [DML] seeking advice
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] seeking advice



Thanks for the information about the struts Elvis.

Unfortunately, I do not read German.

Is there an English version of the web site?

Scott Mueller
002981
RNDOLA


-----Original Message-----
From: Elvis Nocita [mailto:elvisnocita@xxxx] 
Sent: Monday, January 27, 2003 1:48 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: AW: [DML] seeking advice


Tom,

we have great adjustable (refillable) door struts here in Germany, sold by
Adrian, founder of the german Delorean Club. Do not mess around with the
torsion bars. When they lift up the door at least 2 inches (up to maximum
six"), then they are ok. Don't stress them too much only because the struts
have lost pressure. Those struts are about 50$ each and normally a little
bit too strong for the doors. They have a valve at the end of the cylinder
where (when removing the connection to the door) you can release some
pressure. I set them up, so that my doors will open up very nice at about 20
to 25 degrees Celsius ! (60 Fahrenheit ?!?)


If you want those struts, take a look at www.delorean.de. At the market
place Adrian is offering them (may be the price is still wrong since they
converted it from DM to Euro...)



Elvis & 6548 with fine and smooth working doors and a silver power antenna






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated