help!- start problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

help!- start problem



Hello again,
Thanks for the advice so far, but the car's still not running. I'll try to update and answer your questions.


The car was running rough, both at idle(searching)and while driving.
The idle speed motor is turning on.
Voltage on the resistor on the bottom right side during cranking was 4.8 volts.
Voltage at terminal 15 of coil was about 4.3 volts.
Cleaned terminals at plug going into firewall.
Timing is slightly reatarded.
Took out RPM relay and checked it out, alright.
Mixture appears to be fine.


If anyone has any more suggestions, I'd be greatful. Again, thanks for all the help.
-Rob




_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated