Re: Braided fuel lines... *UPDATE*

[Travis Goodwin <tgoodwin@xxxx>]

John, 

I was on your website but your image for the SS fuel lines is busted. What I
want to replace are the 6 lines from the distributor to the injectors, cold
start valve to distributor, and the two lines to the top of the CPR.

The piece I'm trying to locate is a banjo adapter that has an 8MM hole on
one end and SAE male on the other to accept a standard fitting. This way,
the banjo will never have to be removed; you can just unscrew the hose from
the adapter.

Aeroquip has what I need but it's only available in 10MM. I have found the
8MM banjo that matches the one I currently have
(http://www.bsr-aerotek.com/econhose9.htm), but no one will shrink-fit
Teflon in my area.

HOLD THE PHONE!

As I type this message, I may have found something. 
http://www.goodridge.net/cat/adaptors/jicunfbanjo.htm
They have a banjo adapter with a 5/16 hole size... Hmm 8MM is .314 inches. 5
divided by 16 is .312.

Of course, if you have them already made, I'd like to see those too.