Re: [DML] coolant lines
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] coolant lines



From: "Lynn Metz" <
> Hey guys:
>
> I am going to replace all of the hoses and coolant and temp sensor very
soon
> (because they are all original). Is there anything else I will need other
than the gasket and
> hoses and clamps? How long should this project take? >
> Thanks,
>
> Brian
> 16584

Brian,

This will be the perfect time to install a new distributor cap, rotor
button, vacuum hoses, plugs and plug wires.
The project is not that hard, but is time consuming. Plan on taking at least
a day and make sure that you label all the hoses and lines that you remove.

Robert Starling
Vin# 5252






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated