Re: [DML] coolant lines

["DMC Joe" <dmcjoe@xxxx>]

The Water Pipe Service Kit contains the hoses and the Intake Manifold O
rings Gasket and Seal Kit includes all of the gaskets and seals required to
replace the hoses you mentioned. All of the seals and gaskets are of the
"dry type" meaning they do not require any sealant.

The DeLorean Suggested Warranty Repair Times Manual indicates 2.2 hours
(operation #13005) for this procedure. If you have never performed this
procedure before it may take you 8 to 10 hours to complete.

"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: Lynn Metz <metzlynn@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Friday, April 14, 2000 9:04 AM
Subject: [DML] coolant lines


> Hey guys:
>
> I am going to replace all of the hoses and coolant and temp sensor very
soon
> (because they are all original). What I am wondering is about the hoses
> that are "under the manifold". I guess you have to remove the manifold?
> Question: what is the cost for these hoses (four?) and the gasket for the
> manifold? Is there anything else I will need other than the gasket and
> hoses and clamps? How long should this project take? Also, do you seal
the
> gasket with a sealer?
>
> Thanks,
>
> Brian
> 16584