[DML] Body Mounting Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Body Mounting Bolts



hey list,

Earlier in the week I was working on removing the body mounting bolts when 
I got into a little problem with it. I managed to get one of the bolts 
securing the front of the body to the frame at the front shock towers, but 
the drivers side one won't move. In order to keep the weld nut from moving 
on the passenger side, I stuck the flat side of a tire iron into the place 
where the weld nut was and that seemed to have made the nut stay in place. 
Another problem I am having is the mounting bolt that secures the passenger 
side of the cross brace in the engine compartment, I am afraid that I have 
broken the weld nut free and now the bolt spins freely but doesn't get loose. 
I tried to find a spot where I could put that flat side to the tire iron in 
there again to see if that would work but it looks to be a closed part of the 
frame. Does anyone have any information to remove those 2 mounting bolts. 
And also I can't seem to get a good grip on the mounting bolt securing the 
passenger side pontoon to the frame. Do I have to remove that piping inside 
the pontoon that connects to the air cleaner? Any help would be greatly 
appreciated. Thanks a lot everyone!

Later,
Nick
VIN#1852




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated