Re: [DML] Hard/No Cold Start

["content22207" <brobertson@xxxxxxxxxxxx>]

Ignition. Ensure you're getting a proper spark.

Remember: 9 out of 10 engine running problems are electrical, not fuel
delivery.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "Jason Rowe" <rowejj@xxxx> wrote:
>         ok, here's what I've done so far and still no luck. 
> 
> 1. Grounded the blue/black wire on the thermo-time switch
>     and made sure that the red/white wire had power - Check
> 
> 2. Pulled cold start valve off and made sure it was spraying - Check
> 
> 3. The plug is in the housing over the mixture screw.
> 
> 4. Checked the inertia switch just for kicks.
> 
>     Where do I go from here?    
> 
>       Thanks to all that have responded so far.   Jason #5903




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/