ok, here's what I've done so far and still no luck. 1. Grounded the blue/black wire on the thermo-time switch and made sure that the red/white wire had power - Check 2. Pulled cold start valve off and made sure it was spraying - Check 3. The plug is in the housing over the mixture screw. 4. Checked the inertia switch just for kicks. Where do I go from here? Thanks to all that have responded so far. Jason #5903 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/