Re: [DMCForum] More on the Scientific Method ??????????

["Dave Stragand" <dave.stragand@xxxxxxxxxxxxxxx>]

I go by the principle of "Occam's Razor" -- All other things being equal, the simplest solution is usually the correct one.

These engines, like most, are fairly bulletproof.  If it turns over, it should run.  It may run poorly, but it should run.  A rebuild may solve the problem, but only through blunt force -- if you redo everything, you're likely to fix the problem inadvertently.  It might work, but it could be overkill.

The whole process of troubleshooting is really just a methodology.  If you nail the methodology, you WILL solve the problem.

I sent the following to Rich about a week ago.  I'll share it here.

****
An excerpt for you.  Don't worry; you will get this problem solved....  "Gumption is the psychic gasoline that keeps the whole thing going. If you haven't got it there's no way the DeLorean can possibly be fixed. But if you have got it and know how to keep it there's absolutely no way in this whole world that DeLorean can keep from getting fixed. It's bound to happen."  =) 

-Dave 

************************** 

This morning I talked about hierarchies of thought...the system. Now I want to talk about methods of finding one's way through these hierarchies...logic. 

Two kinds of logic are used, inductive and deductive. Inductive inferences start with observations of the machine and arrive at general conclusions. For example, if the cycle goes over a bump and the engine misfires, and then goes over another bump and the engine misfires, and then goes over another bump and the engine misfires, and then goes over a long smooth stretch of road and there is no misfiring, and then goes over a fourth bump and the engine misfires again, one can logically conclude that the misfiring is caused by the bumps. That is induction: reasoning from particular experiences to general truths. 

Deductive inferences do the reverse. They start with general knowledge and predict a specific observation. For example, if, from reading the hierarchy of facts about the machine, the mechanic knows the horn of the cycle is powered exclusively by electricity from the battery, then he can logically infer that if the battery is dead the horn will not work. That is deduction. 

Solution of problems too complicated for common sense to solve is achieved by long strings of mixed inductive and deductive inferences that weave back and forth between the observed machine and the mental hierarchy of the machine found in the manuals. The correct program for this interweaving is formalized as scientific method. 

Actually I've never seen a cycle-maintenance problem complex enough really to require full-scale formal scientific method. Repair problems are not that hard. When I think of formal scientific method an image sometimes comes to mind of an enormous juggernaut, a huge bulldozer...slow, tedious lumbering, laborious, but invincible. It takes twice as long, five times as long, maybe a dozen times as long as informal mechanic's techniques, but you know in the end you're going to get it. There's no fault isolation problem in motorcycle maintenance that can stand up to it. When you've hit a really tough one, tried everything, racked your brain and nothing works, and you know that this time Nature has really decided to be difficult, you say, ``Okay, Nature, that's the end of the nice guy,'' and you crank up the formal scientific method. 

For this you keep a lab notebook. Everything gets written down, formally, so that you know at all times where you are, where you've been, where you're going and where you want to get. In scientific work and electronics technology this is necessary because otherwise the problems get so complex you get lost in them and confused and forget what you know and what you don't know and have to give up. In cycle maintenance things are not that involved, but when confusion starts it's a good idea to hold it down by making everything formal and exact. Sometimes just the act of writing down the problems straightens out your head as to what they really are. 

The logical statements entered into the notebook are broken down into six categories: (1) statement of the problem, (2) hypotheses as to the cause of the problem, (3) experiments designed to test each hypothesis, (4) predicted results of the experiments, (5) observed results of the experiments and (6) conclusions from the results of the experiments. This is not different from the formal arrangement of many college and high-school lab notebooks but the purpose here is no longer just busywork. The purpose now is precise guidance of thoughts that will fail if they are not accurate. 

The real purpose of scientific method is to make sure Nature hasn't misled you into thinking you know something you don't actually know. There's not a mechanic or scientist or technician alive who hasn't suffered from that one so much that he's not instinctively on guard. That's the main reason why so much scientific and mechanical information sounds so dull and so cautious. If you get careless or go romanticizing scientific information, giving it a flourish here and there, Nature will soon make a complete fool out of you. It does it often enough anyway even when you don't give it opportunities. One must be extremely careful and rigidly logical when dealing with Nature: one logical slip and an entire scientific edifice comes tumbling down. One false deduction about the machine and you can get hung up indefinitely. 

In Part One of formal scientific method, which is the statement of the problem, the main skill is in stating absolutely no more than you are positive you know. It is much better to enter a statement ``Solve Problem: Why doesn't cycle work?'' which sounds dumb but is correct, than it is to enter a statement ``Solve Problem: What is wrong with the electrical system?'' when you don't absolutely know the trouble is in the electrical system. What you should state is ``Solve Problem: What is wrong with cycle?'' and then state as the first entry of Part Two: ``Hypothesis Number One: The trouble is in the electrical system.'' You think of as many hypotheses as you can, then you design experiments to test them to see which are true and which are false. 

This careful approach to the beginning questions keeps you from taking a major wrong turn which might cause you weeks of extra work or can even hang you up completely. Scientific questions often have a surface appearance of dumbness for this reason. They are asked in order to prevent dumb mistakes later on. 

Part Three, that part of formal scientific method called experimentation, is sometimes thought of by romantics as all of science itself because that's the only part with much visual surface. They see lots of test tubes and bizarre equipment and people running around making discoveries. They do not see the experiment as part of a larger intellectual process and so they often confuse experiments with demonstrations, which look the same. A man conducting a gee-whiz science show with fifty thousand dollars' worth of Frankenstein equipment is not doing anything scientific if he knows beforehand what the results of his efforts are going to be. A motorcycle mechanic, on the other hand, who honks the horn to see if the battery works is informally conducting a true scientific experiment. He is testing a hypothesis by putting the question to nature. The TV scientist who mutters sadly, ``The experiment is a failure; we have failed to achieve what we had hoped for,'' is suffering mainly from a bad scriptwriter. An experiment is never a failure solely because it fails to achieve predicted results. An experiment is a failure only when it also fails adequately to test the hypothesis in question, when the data it produces don't prove anything one way or another. 

Skill at this point consists of using experiments that test only the hypothesis in question, nothing less, nothing more. If the horn honks, and the mechanic concludes that the whole electrical system is working, he is in deep trouble. He has reached an illogical conclusion. The honking horn only tells him that the battery and horn are working. To design an experiment properly he has to think very rigidly in terms of what directly causes what. This you know from the hierarchy. The horn doesn't make the cycle go. Neither does the battery, except in a very indirect way. The point at which the electrical system directly causes the engine to fire is at the spark plugs, and if you don't test here, at the output of the electrical system, you will never really know whether the failure is electrical or not. 

To test properly the mechanic removes the plug and lays it against the engine so that the base around the plug is electrically grounded, kicks the starter lever and watches the spark plug gap for a blue spark. If there isn't any he can conclude one of two things: (a) there is an electrical failure or (b) his experiment is sloppy. If he is experienced he will try it a few more times, checking connections, trying every way he can think of to get that plug to fire. Then, if he can't get it to fire, he finally concludes that a is correct, there's an electrical failure, and the experiment is over. He has proved that his hypothesis is correct. 

In the final category, conclusions, skill comes in stating no more than the experiment has proved. It hasn't proved that when he fixes the electrical system the motorcycle will start. There may be other things wrong. But he does know that the motorcycle isn't going to run until the electrical system is working and he sets up the next formal question: ``Solve problem: what is wrong with the electrical system?'' 

He then sets up hypotheses for these and tests them. By asking the right questions and choosing the right tests and drawing the right conclusions the mechanic works his way down the echelons of the motorcycle hierarchy until he has found the exact specific cause or causes of the engine failure, and then he changes them so that they no longer cause the failure. 

An untrained observer will see only physical labor and often get the idea that physical labor is mainly what the mechanic does. Actually the physical labor is the smallest and easiest part of what the mechanic does. By far the greatest part of his work is careful observation and precise thinking. That is why mechanics sometimes seem so taciturn and withdrawn when performing tests. They don't like it when you talk to them because they are concentrating on mental images, hierarchies, and not really looking at you or the physical motorcycle at all. They are using the experiment as part of a program to expand their hierarchy of knowledge of the faulty motorcycle and compare it to the correct hierarchy in their mind. They are looking at underlying form. 



  ----- Original Message ----- 
  From: elvisnocita@xxxxxx 
  To: DMCForum@xxxxxxxxxxxxxxx 
  Sent: Tuesday, August 05, 2003 11:03 AM
  Subject: [DMCForum] More on the Scientific Method ??????????


  Rich, if your motor is squeaking - there is something wrong !
  for not to say it must be fucked up somehow !!!!!!!

  did you kill your piston rings somehow ???

  I can't understand why I am the only one who says that this is not normal.
  Are all the others here laughing their butts off because of Rich's motor
  problems ?

  I still haven't seen a single picture of your motor, but to me it sounds as
  it 
  needs to be rebuilt completely ! A GOOD MOTOR IS NOT SQUEAKING AND
  IF IT STOPS WITH OIL IN THE CYLINDERS THEN THERE'S SOMETHING FUCKED UP !!!!

  Dave, he listens to your words - what is your opinion to that squeaking
  stuff ?

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.