Re: [DMCForum] ELECTRICAL STARTING PROBLEMS

[mike clemens <rmclemns@xxxxxxxxx>]

Bob,

The negative cable is brand new and I am going to
trouble shoot the positive cable next.  If necessary,
I'll jumper around both and see what happens.

Mike

--- Bob Brandys <BobB@xxxxxxxxxxxxxx> wrote:

> Mike,
> 
> 
> I have seen behavior like this from bad battery
> cables.  On the outside 
> the cables look fine, but the connection is
> intermittent.
> 
> You can test this when it does not work.  With some
> one holding the 
> key(when it is not starting)  in the start position,
> measure the 
> voltages from the bat term to the starter and the
> ground.  Cut a little 
> hole in the bat cable beyond the connector.
> 
> BOB
> 
> 



            
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---