I am not an expert and I may be incorrect but the Lamba counter is used to tell you when to replace oxygen sensor, once it hits 30,000 miles you reset it and replace your sensor. Your speedometer (angle drive) must be functioning for this to work.... Mike 2109 -----Original Message----- From: Ryan Hood [mailto:dixon@xxxxxxxxxxxxx] Sent: Tuesday, December 10, 2002 1:57 PM To: DMCForum@xxxxxxxxxxxxxxx Subject: [DMCForum] Re: To buy or not to buy VIN 7007 and 10792 Actually I prefer a manual transmission. That's why I'm more interested in VIN 10792. My future Delorean won't be a daily driver. but I would like to drive it whenenver I want (weekends etc..) Does anybody have a clue why the lambda-counter and lambda relay were removed? What is that good for? Ryan ----- Original Message ----- From: Walter Coe To: DMCForum@xxxxxxxxxxxxxxx Sent: Tuesday, December 10, 2002 3:45 PM Subject: [DMCForum] Re: To buy or not to buy VIN 7007 and 10792 Ryan, Some additional thoughts: Consider whether you really want a DeLorean with an automatic transmission. Most people prefer a manual, and they give better fuel economy anyway. If you go chipping at epoxy, be careful because broken pieces can be as sharp as a razor blade. (Ask me how I know.) My opinion is that any DeLorean that is used as a daily driver should have a full frame-off restoration to preserve the frame; though, very few people are willing to go to this much trouble. Walt To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ [Non-text portions of this message have been removed] To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>