Luke, I don't personally rebuild the CV shafts but I have a company here in Dallas that does it for me. 22mm is = to about 7/8' inch which is 22.225mm. Normally they are like read in the decimal so you can get it down to the thousandth. 22mm would be to loose in the reading. John Hervey www.specialtauto.com -----Original Message----- From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of L. Sandel Sent: Tuesday, September 11, 2007 4:27 PM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] CV Joint ball bearings Can anybody confirm the size of the CV ball bearings? I calipered them at "really close" to 22mm, but wanted to be sure before I attempted to source them. If anybody has any suggestions for that too, that'd be great. Thanks, Luke / 10270 [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: mailto:dmcnews-digest@xxxxxxxxxxxxxxx mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/