--- In dmcnews@xxxxxxxxxxxxxxx, "robert parker" <roberthparker@xxxx> wrote: > Well, my clutch suddenly began screeching at me last weekend (dratted > throw-out bearing). Time for clutch work. My last foray into this > experience was nearly 30 yrs ago on a '52 Chevy. Messy, but not that > difficult. Problem: the Shop Manual is NO help in R&R, and I didn't > fiind any info in the archives. Are there "Follow these steps" out there to > be obtained? I don't particularly want to just start removing parts that I > "think" might need to be. The Chevy was quite straight forward. I think > this endeavor may be a bit more involved. Assistance is always > appreciated. Drive Stainless (when able) Robert VIN 6924 > > Hey Robert I just did mine last weekend though something is still making a rubbing noise which goes away after like five minutes of the car running.. makes no sense.. anyway I got pretty good at it since i had to take it out twice and recheck everything.. The book does suck though it is about right.. the only thing I did to make it easier is to take off the splash shields and the trans mounts in the rear after u have the tranny supported.. u dont need to unhook the emergency brake cable or take out the coolant pipes.. just remove the splash sheilds to move the cable out of the way.. other than that its pretty straightforward and u should be a ble to have it unbolted and out in about an hour.. Dave.. vin 15275.. if u need any more help write me or call me at 816- 221-9756.. To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/