Well, my clutch suddenly began screeching at me last weekend (dratted throw-out bearing). Time for clutch work. My last foray into this experience was nearly 30 yrs ago on a '52 Chevy. Messy, but not that difficult. Problem: the Shop Manual is NO help in R&R, and I didn't fiind any info in the archives. Are there "Follow these steps" out there to be obtained? I don't particularly want to just start removing parts that I "think" might need to be. The Chevy was quite straight forward. I think this endeavor may be a bit more involved. Assistance is always appreciated. Drive Stainless (when able) Robert VIN 6924 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/