Re: High idle (not linkage)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: High idle (not linkage)



I agree with David - Sounds like the vacuum hoses are routed 
incorrectly from the thremo vacuum switch.

Harold McElraft - 3354

--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx> 
wrote:
> Check the vacuum advance system. Make sure it is operating properly
> and the hoses are hooked up right and there are no leaks. You could
> also put a timing light on the motor to make sure the system is 
set right.
> David Teitelbaum
> vin 10757
> 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, Christian Williams <delorean@xxxx> 
wrote:
> > Hi guys,
> > 
> 
> 
> > What else should I check?
> > 
> > Thanks,
> > Christian






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated