Re: High idle (not linkage)

From: "David Teitelbaum" <jtrealty@xxxx>
Date: Mon, 17 Nov 2003 20:42:07 -0000

Check the vacuum advance system. Make sure it is operating properly
and the hoses are hooked up right and there are no leaks. You could
also put a timing light on the motor to make sure the system is set right.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, Christian Williams <delorean@xxxx> wrote:
> Hi guys,
> 

> What else should I check?
> 
> Thanks,
> Christian

Follow-Ups:
- Re: High idle (not linkage)
  - From: Harold McElraft

References:
- High idle (not linkage)
  - From: Christian Williams

Prev by Date: Re: [DML] Re: Delorean Playboy Interview
Next by Date: Re: Single Piece Trim Panel vs Padded Arm Rest Extension
Previous by thread: High idle (not linkage)
Next by thread: Re: High idle (not linkage)
Index(es):
- Date
- Thread

Back to the Home of PROJECT VIXEN ï»¿

Copyright ProjectVixen.com. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive DMCNews Mailing List Archive DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated