If it will help, I have 3 pictures of the clutch fork set up on the site under reference general. John hervey http://www.specialtauto.com/delorean-parts/reference-materials.html -----Original Message----- From: at88mph [mailto:at88mph@xxxx] Sent: Friday, May 23, 2003 4:13 PM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] clutch fork broken? > I ordered a new throw out bearing for a DeLorean that I'm working on and > noticed that it slides on the clutch fork. On one side of the bearing, > there is a small bracket that slides onto the clutch fork, however, on the > other side, there is nothing. I compared both the stock bearing and the > new one (from PJ Grady) and they both look the same so I'm guessing > something is just missing off the clutch fork or its broken? I looked at > the parts catalog but didn't notice anything special in the diagram for the > clutch fork. Am I missing something? > > Here is a pic of the bearing: > http://temp.corvetteforum.net/c5/at88mph//bearing.jpg > > Here is a pic of the fork: > http://temp.corvetteforum.net/c5/at88mph//clutchfork.jpg > > > Here is a pic of bearing on the fork: > http://temp.corvetteforum.net/c5/at88mph//forknbearing.jpg > > Thanks for any help!