John, Thanks alot for those pics! That really helped. We haven't installed the bearing/fork yet, but I'm willing to bet that when we do, when the fork/bearing slide back, the one side that doesn't have anything holding it to the fork will be out or in a bind so to speak as it fits loose on the fork. Should I take a pair of pliers and try to close the bearing brackets slightly so it'll fit more snug on the fork or is it supposed to be loose like that? Thanks again for the info and help! ----- Original Message ----- From: "John Hervey" <john@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Saturday, May 24, 2003 12:07 AM Subject: RE: [DML] clutch fork broken? > If it will help, I have 3 pictures of the clutch fork set up on the site > under reference general. > John hervey > http://www.specialtauto.com/delorean-parts/reference-materials.html > > -----Original Message----- > From: at88mph [mailto:at88mph@xxxx] > Sent: Friday, May 23, 2003 4:13 PM > To: dmcnews@xxxxxxxxxxxxxxx > Subject: [DML] clutch fork broken? [moderator snip]