I ordered a new throw out bearing for a DeLorean that I'm working on and noticed that it slides on the clutch fork. On one side of the bearing, there is a small bracket that slides onto the clutch fork, however, on the other side, there is nothing. I compared both the stock bearing and the new one (from PJ Grady) and they both look the same so I'm guessing something is just missing off the clutch fork or its broken? I looked at the parts catalog but didn't notice anything special in the diagram for the clutch fork. Am I missing something? Here is a pic of the bearing: http://temp.corvetteforum.net/c5/at88mph//bearing.jpg Here is a pic of the fork: http://temp.corvetteforum.net/c5/at88mph//clutchfork.jpg Here is a pic of bearing on the fork: http://temp.corvetteforum.net/c5/at88mph//forknbearing.jpg Thanks for any help!