The difference is the placement of the shiny label, the struts will work fine on either side it's just if you switch them you won't see the labels. David Teitelbaum vin 10757 --- In dmcnews@xxxxxxxxxxxxxxx, "content22207 <brobertson@xxxx>" <brobertson@xxxx> wrote: > I think you mean swap the struts vs passenger door egress, but it does > bring up a question: > > Rob Grady's door struts are labeled "Driver" and "Passenger". Wonder > what the difference is between them? > > Bill Robertson > #5939 > > >--- In dmcnews@xxxxxxxxxxxxxxx, jwit6@xxxx wrote: > > Seems to me I recall the DMC-12 has 2 doors. Use the other one for a > while. > > That way they'll wear more evenly.... :-) > > > > In a message dated 12/14/02 12:03:19 PM Eastern Standard Time, > > RJRavalli@xxxx writes: > > > > << Ok I'm having my first major problem with my drivers side door. > > The joint where the strut connects to the door is squeaking really > > badly and the door has become harder to close. I'm hoping the > > strut is not ready to pop off, but what can I do right now to > > tighten this up/get rid of this problem outside of buying a strut? > > Is there anything? > > > > (I need to drive my D to work tomorrow so I'm hoping it will hold > > up until I can get advice and take some kind of look at this!) > > > > Thank you as always, > > > > Richard >>