Re: [DML] Door problems too
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Door problems too



I think you mean swap the struts vs passenger door egress, but it does
bring up a question:

Rob Grady's door struts are labeled "Driver" and "Passenger". Wonder
what the difference is between them?

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, jwit6@xxxx wrote:
> Seems to me I recall the DMC-12 has 2 doors. Use the other one for a
while. 
> That way they'll wear more evenly.... :-)
> 
> In a message dated 12/14/02 12:03:19 PM Eastern Standard Time, 
> RJRavalli@xxxx writes:
> 
> << Ok I'm having my first major problem with my drivers side door.
> The joint where the strut connects to the door is squeaking really
> badly and the door has become harder to close. I'm hoping the
> strut is not ready to pop off, but what can I do right now to
> tighten this up/get rid of this problem outside of buying a strut?
> Is there anything?
> 
> (I need to drive my D to work tomorrow so I'm hoping it will hold
> up until I can get advice and take some kind of look at this!)
> 
> Thank you as always,
> 
> Richard >>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated