Re: Some mighty hard shifting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Some mighty hard shifting



You might only need a linkage adjustment. Get out your Workshop Manual 
and go to F:07:01. You should also make sure everything is lubricated 
and moving freely. If this doesn't help you might have to replace the 
roll pin inside the transmission. As long as you are working around 
the transmission make sure you also check the fluid level As per 
F:03:01. You really don't need anything exotic, #80-90 weight gear oil 
is fine (A:05:01).
David Teitelbaum
vin 10757


--- In dmcnews@xxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> My shifting has become difficult and I can only find 5th gear every 
so
> often. There is no grinding in the transmission and I have brand new 
master
> and slave clutch cylinders. This leads me to believe that the shift 
cable
> needs to be shortened since I cannot get far enough to the right to 
fifth
> gear.
> 
> Does this sound correct or am I way off base here?






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated