A linkage adjustment adjustment sounds about right. Specificly the crossgate cable. Same problem here, except it was reversed, and couldn't get into 2nd. Just as important, while you're down there, make sure that you also lube the pivot bolt too. -Robert vin 6585 "X" --- In dmcnews@xxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > My shifting has become difficult and I can only find 5th gear every so > often. There is no grinding in the transmission and I have brand new master > and slave clutch cylinders. This leads me to believe that the shift cable > needs to be shortened since I cannot get far enough to the right to fifth > gear. > > Does this sound correct or am I way off base here?